What Is A Pedal Platform Amp?

I’m currently working on a long-term review of my Marshall Origin 20H amp, and one of the key questions for that review is this: can we use the Marshall Origin 20H as a pedal platform amp?

But what does the term “pedal platform amp” mean? What is a pedal platform amp? I need to answer that first.

tl;dr

A “pedal platform amp” is an amp that allows us to hear our drive pedals the way that they are meant to sound.

There are plenty of amps out that that take drive pedals well, but cannot be called “pedal platform amps” because they colour the overall tone too much, or in a way that makes our drive pedals sound different to what the pedal designer intended.

While there’s no such thing as a universal “pedal platform amp”, many drive pedals since 2010 are designed to go into the so-called “blackface clean” amp: an amp that has a clean channel similar to Fender’s “blackface” panel amps of the 1960s.

What Is The Purpose Of A Pedal Platform Amp?

Why do we even care about whether an amp can be a pedal platform or not?

I’m going to answer that with another question:

  • Do you want to get your overdrive sounds from a pedal?
  • Or do you want to get your dirt sounds from amp distortion instead?

If you’re someone who wants to use pedals to get your overdriven sounds, then you probably also want those pedals to sound “right”; i.e., to sound the way that the pedal designer intended them to sound.

And that’s what a pedal platform amp does: our drive pedals sound the way they are meant to sound. That’s the bit that matters.

Plenty Of Amps Take Pedals Well, But Are Not “Pedal Platform Amps”

There’s a difference between a pedal sounding good and a pedal sounding as intended.

Go down to your local guitar shop. Take the same guitar, and try a few different ones out. Just about every amp you try will have its own sound1. And very few of them will sound the same.

Guitar amps don’t just make our guitars loud enough to be heard. They also make our guitars sound interesting enough to be worth hearing. They don’t do that by being flat or neutral. They add their own character to the signal by shaping the lows, mids and top-end. Plus they also affect things like note attack, responsiveness and playing dynamics.

On top of that, the speaker you’re using (and the speaker cab too) all make a difference to the final tone. An amp doesn’t just sound different when plugged into a specific speaker, it also reacts differently2.

A drive pedal on a pedalboard can only influence a small amount of this.

Many amps take drive pedals well; as in, we can get a good sound out of that amp when we use our drive pedals with it. But that doesn’t mean the end result sounds the way the pedal was designed to sound.

That’s why, if you want a specific drive pedal to sound the way the designers intended it, it really helps to run the pedal into the kinds of amp that the pedal designer tests their designs against.

Pedal Designers Tend To Design Pedals For Specific Flavours Of Amp

This is just my personal observation from having tried a lot of pedals from a wide variety of pedal brands over the last decade. Walk into any guitar store, and I’m sure you will find drive pedals that do not fit into what I’m about to say.

In my experience, many pedal brands test their circuit designs through particular types of amps.

  • Pedal designers in the USA tend to design their pedals to work well with various Fender amps. That seems to be partly because Marshall amps were very expensive and quite rare in the USA for many decades.
  • Equally, many pedal designers outside the USA used to design their pedals to work well into (often cranked) Marshall amps. That seems to be partially because Marshall was the sound of hard rock and metal for many decades, while Fender amps used to be a lot rarer.

Over the last decade or so, more and more pedal designers seem to have settled on targeting the “blackface-style clean channel” sound for their dirt pedals: which is roughly the sound of a mid-60s Fender amp.

So when you see people talk about a “pedal platform amp”, they’re probably talking about an amp that has a “blackface-style clean channel” on it. Just be aware that you’ll still run into pedals that don’t sound as intended through such an amp.

Final Thoughts

There’s no law that says you have to run your pedals into a so-called “pedal platform amp”.

Here on the blog, I want to make each pedal sound as good as I can. To do that, I try to figure out what kind of amp the pedal may have been designed for. Failing that, I’ll run the amp either into an Axe-FX 3 preset built for that genre of pedal, and/or I’ll use an amp that us home players are likely to have access to.

But there’s also a lot of fun to be had from running drive pedals into other amps, to search for different sounds that inspire me; to find sounds that allow me to express myself the way that I want to.

At the end of the day, that’s what making music is all about for me: self-expression. And that doesn’t come from following the rules. It comes from finding my own path.

Footnotes

  1. There are specialist amps that are designed to sound completely flat or neutral. They normally exist to amplify modellers and the like to live performance levels. ↩︎
  2. There’s an electrical coupling between the amp’s output transformer and the speaker – known as the speaker impedance curve – which has a big effect on tone and playing feel. ↩︎

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.